Surpass Actuator 177 in. lbs (20Nm), 110VAC w/ Safe Return
Stock #
590023
Series
5900
List Price: $1,067.00
Price: $853.60
- Buy 3 for $768.24 each
Surpass Safe Return Actuator Standard FeaturesFail safe return upon loss of power Programmable fail safe position (open, close, user-defined) Super capacitor recharges in seconds Quarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy enclosure Local operation and valve status via digital display Highly visible multi-color LED position indicator 100% duty cycle Manual override Heavy duty motor with over temp/over current/motor stall protection Thermostatically controlled anti-condensation heater Three programmable relays output 16 different status parameters (default is OPEN/CLOSE/FAULT) Self-locking gear drive with no additional brake required Standard ISO5211 multi-flange valve mounting CSA Listed per UL429 and CSA C22.2, CE mark
Valworx 590020 Surpass safe return actuator incorporates several powerful features for reliable feedback and operation. Electric actuator can be programmed to operate in continuous mode (a signal pulse triggers continuous operation until full open or close) or inch mode (a signal pulse runs the motor for the duration of the pulse). Separate motor and control circuits for easier wiring and improved safety. Programmable end-of-stroke speed control to reduce/eliminate water hammer. Local control, battery charge and operating status via digital display.
Upon loss of power the actuator returns to the pre-determined safe position. Upon restoration of power the actuator remains in fail safe position until receipt of an external control signal.
Valworx Surpass actuators are typically used to automate quarter turn ball valves, butterfly valves or dampers. Actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive. Non-intrusive wiring using the included multi-conductor cable.
Actuators are tested to rigorous UL and CSA standards and certified by CSA. Thermostatically controlled anti-condensation heater will help protect actuator against damage from condensation.
The Safe Return function returns the valve to the fail-safe position in the event of a loss of electrical power. It is not intended for and should not be used for normal operation.
Valworx 590020 Surpass safe return actuator incorporates several powerful features for reliable feedback and operation. Electric actuator can be programmed to operate in continuous mode (a signal pulse triggers continuous operation until full open or close) or inch mode (a signal pulse runs the motor for the duration of the pulse). Separate motor and control circuits for easier wiring and improved safety. Programmable end-of-stroke speed control to reduce/eliminate water hammer. Local control, battery charge and operating status via digital display.
Upon loss of power the actuator returns to the pre-determined safe position. Upon restoration of power the actuator remains in fail safe position until receipt of an external control signal.
Valworx Surpass actuators are typically used to automate quarter turn ball valves, butterfly valves or dampers. Actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive. Non-intrusive wiring using the included multi-conductor cable.
Actuators are tested to rigorous UL and CSA standards and certified by CSA. Thermostatically controlled anti-condensation heater will help protect actuator against damage from condensation.
The Safe Return function returns the valve to the fail-safe position in the event of a loss of electrical power. It is not intended for and should not be used for normal operation.
| Type | On-Off with Safe Return |
|---|---|
| Rotation | 0-90° (clockwise or counter-clockwise) |
| Actuator Voltage | 110 VAC 50/60Hz |
| Current Rating | 0.32A (full load amps) |
| Cycle Time | 11 seconds per 90° rotation |
| Duty Cycle | 100% |
| Temperature Range | -13 to 149°F (-25 to 65°C) |
| ISO 5211 Mount | F03/F05 |
| Enclosure | Aluminum alloy, polyester painted, SS fasteners |
| Enclosure Protection | IP67 weatherproof |
| Electrical Connections | Prewired cable with flying leads 1 meter (3.2 feet) |
| Valve Position Confirmation | 3 x programmable relays rated 0.8A@110VAC, 1A&30VDC |
| Input Control Signal | Dry Contact |
| Valve Position Indicator | LED Dome Indicator R/Y/G Close/Fault/Open |
| Operating Mode | Inching or continuous |
| Speed Control | Programmable |
| Manual Override | 6mm Allen Wrench |
| Motor Protection | Over temp/Over current/Motor stall |
| Anti-Condensation Heater | Thermostatically controlled |
| Approvals | CSA Listed. Conforms to UL Std 429 Certified to CSA Std C22.2 No. 139. CE Mark |
| Output Drive | 11mm |
Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.