New!
Digital Smart Positioner
Digital smart positioners convert a 4-20mA signal to a proportional pneumatic output. This output is fed to an air actuator which in turn controls the valve position and flow (combined with mechanical position feedback). Fast and accurate response times from input change to valve movement. Auto-calibration feature for easy set up. Positioner can be setup to rotate output shaft clockwise or counter-clockwise 90 degrees. Easily convertible from spring return to double acting or vice versa. 529860 is the base model; 529861 includes a visual indicator and two limit switches.
Electric Quick Close Actuators
Valworx 5618QC series quick close electric actuators are typically used to automate quarter turn ball valves, butterfly valves or dampers. The valve actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive. 5618QC series actuators feature visual and electrical valve position indication, manual override, and weatherproof enclosures. Unique integral motor/housing design provides higher torque in a very small package. Tested to rigorous UL and CSA standards and certified by CSA. Available in 24VDC or 110VAC.
Stainless Spring Check Valves
Stainless steel check valves are typically used to prevent unwanted backflow for water, air, oil and other media compatible with the materials of construction. Concentric design, 316 stainless steel check valves can be used in vertical and horizontal applications. Spring loaded design reduces water hammer. Suitable for non-viscous, smooth-flowing non-particulate media. Available in NPT sizes 1/4" to 4"
Modbus Control System for 5618 Series Electric Actuators
Valworx 5618 series Modbus modules are a factory installed option for Valworx 5618 series EPS (Electronic Positioning System) electric actuators. Modbus-enabled 5618 actuators operate using standard Modbus-RTU protocol where position, alarms and status are accessed over a Modbus network with Modbus-RTU Function codes 0x03 and 0x10. Modbus modules are a pre-installed option for 5618 electric EPS actuators allowing multiple actuator installations. In addition, actuators equipped with Modbus allow the valve position to be adjusted from 0-100% using an internal scale of 0-10,000 (fully closed to fully open).
Explosion Proof 3-Way Stainless Ball Valves - Positioner
Valworx electric actuated 3-way stainless steel ball valves are typically used as a diverter, selector or mixing valve to control water, air, oil and other media compatible with the materials of construction. Explosion proof electric actuators feature visual and electrical valve position indication, manual override, and weatherproof enclosures. Valworx does not recommend the use of high temperature brackets with explosion proof actuators. Actuator is rated for UL Class I Div I Groups C & D. Also rated for ATEX and IECEx.
Explosion Proof 3-Way Sanitary Ball Valves - Positioner
Valworx explosion proof explosion proof sanitary ball valves are typically used for food, beverage, pharmaceutical, personal care and pet care applications where sanitary construction is required, as well as for utility, process and corrosive and hazardous environments where quick clamp applications are needed. Available in t-port and l-port configurations. Can be used for diverter, selector or mixing valve applications. Highly polished internals (8- 12 Ra finish) and Dyneon® PTFE cavity-filled ball seats are standard. Explosion proof actuator rated for UL Class I Div I Groups C & D. Also rated for ATEX and IECEx.
Explosion Proof 3-Way Brass Ball Valves - Positioner
Valworx explosion proof electric actuated 3-way brass ball valves are used for positioning control of diverter, mixing or selector valves to control water, air, oil and other media compatible with the materials of construction. Electric actuators feature visual valve position indication, manual override, and weatherproof enclosures. Explosion proof actuator rated for UL Class I Div I Groups C & D. Also rated for ATEX and IECEx.
Electric Actuated 3-Piece V-Port Stainless Ball Valves
Valworx electric actuated stainless steel V-port valves are designed for applications requiring precise flow control. Suitable for use with water, air, oil, and other media compatible with the materials of construction. The valve has a unique three piece investment cast bolted body design with the advantage of a swing out body for easy inline maintenance. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.
Explosion Proof 3-Piece V-Port Stainless Ball Valves
Valworx explosion proof V-port stainless steel ball valves are designed for applications requiring precise flow control in potentially hazardous environments. Suitable for use with water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power. Explosion proof actuator rated for UL Class I Div I Groups C & D. Also rated for ATEX and IECEx.
Electric Actuated 3-Piece V-Port Stainless Ball Valves - Multi-Voltage
Valworx electric actuated stainless steel v-port valves are designed for applications requiring precise control. Factory-installed digital positioning kit for modulating control using a 4-20mA signal. Suitable for use with water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Electric Actuated High Performance Butterfly Valves - Multi-Voltage
Valworx electric actuated high performance butterfly valves are used for On/Off control of media compatible with the materials of construction. Valves are rugged, 316 stainless steel construction, double offset design. Advantages of electric actuated high performance butterfly valves over other type valves may include superior corrosion resistance, and higher pressure and temperature capability. Factory-installed Digital Positioning (DPS) option converts On/Off to modulating operation using a 4- 20mA or 0- 10VDC input signal. Battery Safe Return (BSR) option powers the valve closed (Normally Closed) in the event of a loss of external power. Can also be set to Normally Open.
Large Port Stainless Steel Ball Valves
Stainless Steel Ball Valves New!Valworx 2-piece stainless steel ball valves are designed for use with water, air, oil, and other media compatible with the materials of construction. These valves offer exceptional value which includes a blowout-proof stem design, PTFE (Teflon)/Viton seals and adjustable stem packing gland. Available with electric or pneumatic actuation.
Air Actuated 3-Way Sanitary Ball Valves - All Stainless
Valworx air actuated 3-way all stainless sanitary ball valves are typically used for food, beverage, pharmaceutical, personal care and pet care applications where sanitary construction is required. Both the valve and actuator are 316 stainless steel, providing superior corrosion resistance. Highly polished product contact areas (8- 12 Ra finish) and virgin PTFE cavity-filled ball seats are standard. Rugged Rack & Pinion spring return or double acting pneumatic actuator.
Explosion Proof 3-Way Sanitary Ball Valves
Valworx explosion proof explosion proof sanitary ball valves are typically used for food, beverage, pharmaceutical, personal care and pet care applications where sanitary construction is required, as well as for utility, process and corrosive and hazardous environments where quick clamp applications are needed. Available in T-port and L-port configurations. Can be used for diverter, selector or mixing valve applications. Highly polished internals (8- 12 Ra finish) and Dyneon® PTFE cavity-filled ball seats are standard.
Explosion proof actuator rated for UL Class I Div I Groups C & D. Also rated for ATEX and IECEx.
Explosion Proof 3-Piece Stainless Steel Ball Valves
Valworx explosion proof 3-piece stainless steel ball valves for On/Off or positioning control of water, air, oil and other media compatible with the materials of construction. Electric actuators feature visual and electrical valve position indication, manual override, and weatherproof enclosures. Full port 3-piece stainless steel ball valve with swingout design for easy maintenance. Valworx does not recommend the use of high temperature brackets with explosion proof actuators.
Explosion proof actuator rated for UL Class I Div I Groups C & D. Also rated for ATEX and IECEx.
V-Port Ball
Valworx R5515V series 316 stainless steel 30°, 60°, or 90° V-port ball converts a full port ball 5515 series valve to a V-port. For use with positioning (throttling) applications, the V-port design provides better linearity and therefore more precise flow control. Total flow rate is significantly less than full port valves.
This V-port ball is intended for use with Valworx 5618 EPS Positioner, 5818 EPS Positioner, 5610 with DPS positioning valve assemblies, and 5224/5225 with positioning valve assemblies. Factory installed and tested when ordered as part of an actuated valve assembly.
Explosion Proof Electric Actuated 3-Way Valves
Valworx 584X series stainless steel ball valves and 583X series brass ball valves are equipped with explosion proof actuators certified to UL Class I Div 1 Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1 and AEx db IIC Gb standards. Available in T- and L-Port configurations with 316 stainless or lead-free brass valve construction.
Explosion Proof Electric Actuated Stainless Steel Valves
Valworx 585X series stainless steel ball valves are equipped with explosion proof actuators certified to UL Class I Div 1 Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1 and AEx db IIC Gb standards. On/Off and positioner (servo) models available in both 24VDC and 110VAC. Valve models include 2pc and 3pc design.
Air Actuated Stainless Ball Valves- All Stainless
Valworx 533X series stainless steel valves with stainless steel pneumatic actuator. All 316 stainless construction for superior corrosion resistance. Spring return and double acting models available.
Explosion Proof Electric Actuated Brass Valves
Valworx 583X series lead free brass ball valves are equipped with explosion proof actuators certified to UL Class I Div 1 Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1 and AEx db IIC Gb standards. On/Off and positioner (servo) models available in both 24VDC and 110VAC.
Air Actuated High Performance Butterfly Valve- All Stainless
Valworx 579X series high performance butterfly valves with stainless steel actuator. All 316 stainless steel construction for superior corrosion resistance. Double-offset butterfly valve design can withstand higher temperatures and pressures than conventional valve designs.
Explosion Proof Butterfly Valves
Valworx 587X series ductile iron butterfly valves are equipped with explosion proof actuators certified to UL Class I Div 1 Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1 and AEx db IIC Gb standards. On/Off and positioner (servo) models available in both 24VDC and 110VAC. Lug and wafer style valve mounting with EPDM, NBR or Viton valve seat material.
Explosion Proof Electric Actuators
Valworx 5818 series explosion proof actuators are certified to UL Class I Div 1 Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1 and AEx db IIC Gb standards. Explosion proof capability in a compact, high performing actuator. On/Off and positioner (servo) models available in both 24VDC and 110VAC. Standard ISO 5211 mount for easy valve automation. 50Nm and 200Nm torque rating.
Air Actuated Sanitary Ball Valves- All Stainless
Valworx 5609/5619 series sanitary ball valves feature 316 stainless valves and actuators. All stainless design is suitable for applications requiring hygienic design and offer excellent corrosion resistance in caustic environments. Rugged IP66 stainless actuator is suitable for washdown. Sanitary ball valves have the product contact surfaces polished to an Ra of 8- 10. Tri-clamp end connections for easy removal, disassembly and cleaning.
Air Actuated Sanitary Butterfly Valve- All Stainless
Valworx 5746/5747 series all-stainless air actuated sanitary butterfly valves are typically used for food, beverage, pharmaceutical, personal care and pet care applications where 3-A sanitary construction is required, as well as for utility, process and corrosive environment applications where quick clamp applications are needed. Available with spring return or double acting stainless pneumatic actuators.
All Valworx sanitary butterfly valves feature 316L stainless steel body and disc for superior corrosion resistance. EPDM seals are FDA-approved for food contact. Highly polished internals (32 Ra finish) for smooth, hygienic surface finish. Actuators feature 316 stainless construction and IP66 weatherproof enclosure suitable for washdown applications.
Sanitary butterfly valves can offer a lower cost solution than sanitary ball valves while sanitary ball valves can withstand higher temperatures and pressures.
Air Actuator-Stainless Steel
Valworx 5760/5761 series quarter turn stainless steel rack & pinion air actuators are ideal for actuating a ball valve, butterfly valve or damper. 5760 series are double acting actuators with air to open and air to close. 5761 series actuators are spring return with air to open and springs to close.
Sanitary Check Valves
Valworx 5790 sanitary check valves are typically used to prevent unwanted backflow for food, beverage, pharmaceutical, personal care, and pet care applications where 3-A sanitary construction is required, as well as for utility, process and corrosive environment applications where quick clamp applications are needed. Highly polished internals (32 Ra finish) and Viton seals are standard. Suitable for vertical installation or horizontal where self-draining is not required.
Sanitary Butterfly Valves
Valworx 5740 series sanitary butterfly valves for food, beverage, pharmaceutical, personal care and pet care applications where 3-A sanitary construction is required. Highly polished internals (32 Ra finish). 316L stainless steel valve body, disc and stem. A lower cost hygienic solution for lower pressure applications.
Sanitary Ball Valves
Valworx 5701 series sanitary ball valves for food, beverage, pharmaceutical, personal care and pet care applications where 3-A sanitary construction is required. Highly polished internals (8- 12 Ra finish) and virgin PTFE cavity-filled ball seats are standard. Easy mounting of electric or pneumatic actuators with industry standard ISO5211 direct mounting pad. Triple stem seal design is live-loaded and self-adjusting, compensating for wear, pressure, and temperature fluctuations.
Sanitary 3-Way Ball Valves
Valworx 5721/5731 series sanitary 3-way ball valves are typically used for food, beverage, pharmaceutical, personal care and pet care applications where 3-A sanitary construction is required. Available in T-port and L-port configuration. Highly polished internals (8- 12 Ra finish) and virgin PTFE cavity-filled TFM-1600 ball seats are standard. Easy mounting of electric or pneumatic actuators with industry standard ISO5211 direct mounting pad. Triple stem seal design is live-loaded and self-adjusting, compensating for wear, pressure, and temperature fluctuations.